Text

Text
Text can display any character, but color choices are limited
ZZT-OOP name	N/A
Internal ID	Multiple, used to encode background color: 0x2F: Blue 0x30: Green 0x31: Cyan 0x32: Red 0x33: Purple 0x34: Brown 0x35: Black
Character	Any (determined by tile's color byte)
Default color	White foreground; element ID determines background
Stats?	no
Other traits
Effect on movement	wall
Uses ZZT-OOP color names?	N/A

Text is a terrain type that can have any of the 256 characters. Its intended use is for putting text labels on a board's terrain.

Text is the only element that can display any character without the overhead of using a stat, which makes them useful for ZZT art. However, artistic usage is somewhat hampered by the fact that text can only use a fixed set of color combinations: if you want to write a sentence on the screen in a custom color (e.g., black on light gray), the only way to do it is to

Text is also the only element supported by the built-in editor that has no ZZT-OOP name: e.g., there is no way to change all text tiles to another element type.

Usage of terrain color byte

Text is stored differently than any other element. Internally, ZZT repurposes the element's color byte to store character data instead: this allows the full range of characters to be encoded without having to allocate extra space (in the form of stats) for each tile. Since the color byte is occupied with other data, the actual color info is encoded by having different element IDs for each color. The result is that text is technically not just one element, but several.

Side effects from this roundabout encoding are apparent in a couple of places:

• Overwriting text (using #put or #become) will sometimes result in STK-colored elements. This is because those commands always interpret the color byte as a color: if you #put a gem onto a blue text "Z" (ASCII code 0x5A), you will get a green-on-dark-purple gem (color code 0x5A).
• Unlike most elements, it is impossible to get arbitrary text colors from toolkits or external editors. This is not a matter of ZZT's internal editor being restrictive, but rather a limit imposed by the file format and the in-memory representation.

Text is also the only element supported by the built-in editor that has no ZZT-OOP name: e.g., there is no way to change all text tiles to another element type. This may also be a side effect of text having a unique encoding.

Unassigned element IDs

ZZT only officially supports the seven text colors which have assigned element IDs. However, it is possible to get a few additional colors by using IDs beyond the assigned range, as ZZT interprets all element IDs greater than 0x2E as text. The problem is that all these IDs are buggy because they cause ZZT to read past the end of its table of elements. Touching tiles with these IDs will crash ZZT, and many unassigned IDs will crash ZZT immediately, on the first tick.

Some known unassigned IDs and their text colors:

• 0x36: Blinking white on black
• 0x37: Blinking white on blue
• 0x38: Blinking white on green
• 0x39: Blinking white on cyan
• 0x3A: Blinking white on red
• 0x3B: Blinking white on purple
• 0x3C: Blinking white on brown
• 0x3D: Blinking white on light gray
• 0x45: White on light gray

It is impossible to choose the text foreground color because ZZT hard-codes it to be white. This means there are only 16 possible color combinations: the 7 text colors built into ZZT, and the 9 produced by the unassigned IDs above.